|
Tender description :
|
Tenders Are Invited for Air Drill for Neuro Surgical Procedures with all accessories.
Air Drill for Neuro Surgical Procedures with all accessories. 1.The system shall be able to use for all Neurosurgical (Cranial and Spine) procedure The Motor/Motors should be a Pneumatic driven Motor and Hose can be detached a. Motor speed more than 75,000/min b. Motor torque more than 3.4Ncm c. Power should be 80Watts at 8 Bar. d. The Motor should be light weight; Motor should not be more than 110gm 2. The Unit shall be supplied with the following accessories and their prices shall be indicated separately. (These prices will be considered for the evaluation). i Angled Hand Piece Medium, Long, Extralong (WL 13cm) one each ii Length Reduction Sleeve - 01 no iii Craniotome Hand Piece - 01 No iv Fixed Dura Guard Pediatric - 01 No v Fixed Dura Guard, Standard - 01 No vi Fixed Dura Guard, Long - 01 No vii Perforator Driver - 01 No viii.Reusable Perforators dia.9/12mm - 01 No ix Reusable Skull Perforators dia.6/9mm - 01 No x Reusable Skull Perforators dia.12/15mm - 01 No xi Drill Guide Sleeve for Multifunction Hand Piece- 01 No xii Lateral Burr Guard for Angle Hand Piece xiii Suitable Foot Control - 01 No xiv Air Hoses for Foot Control & High Speed Motor - 01 Nos xv Wall Air Hose 5M 3. The following set of Burrs shall be supplied with the Unit and the prices to be indicated separately (These prices will be considered for the evaluation). i Tungsten carbide reusable Rosen burrs for Angled hand pieces,2.0mm to 6.0mm (05 Nos) - 5 each 25 Nos 100%- Immediately LKR 3,485,710/= USD 10,362/= 11 ii Re-usable Diamond burrs for Angled hand pieces, 2.0mm to 5.0mm (04 Nos)- 5 each iii Re-usable Diamond burrs (Coarse), 4.0mm - 05 No for each hand piece iv Re-usable Diamond burrs (Extra Coarse), 4.0mm - 05 No for each hand piece v Re-usable Neuro cutter US type, 2.5mm & 3.0mm - 05 No for each Hand Piece (3 sets) vi Re-usable Diamond Neuro cutter 2.5 mm & 3.0mm - 05 No for each Hand Piece vii Reverse Taper Burr Coarse Diamond - 05 No for each Hand Piece viii Craniotomy cutter - Straight type Pediatric - 10 No ix Craniotomy cutter - Straight type Standard - 10 No x Craniotomy cutter - Straight type Long - 10 No xii Twist Drill for Large Diameter Hand Piece - 05 No xiii Acorn burr dia.6mm - 5 No 4.The simple and clear coding of hand pieces and burrs correlation shall be available 5.The Storage device along with the holders for individual parts of the motor system shall be supplied and it shall be suitable for mechanical cleaning and for autoclaving 6. A 06 Nos of lubricating oil spray cans (300ml) shall be supplied free of charge with the system. 7. A complete and detailed set of operation, service and maintenance manuals in English shall be supplied with the System. 8. Fully graphic, illustrated technical literature in English describing the items offered and detailing the specifications shall be submitted with the offer. 9. The System supplied must be covered by a comprehensive warranty for a period of 12 calendar months from the date of successfully commissioning. 10. Annual service and maintenance charges including both parts and labor shall be offered for a period of 05 years after warranty.
Instrument Set, for cranial repair and closure, with instrument tray, stainless steel.
Instrument Set for Cranioplasty Mesh fixing. Each set consist of; 1.Screw driver- minimum 3 Nos. 2.Screw holders- minimum 2 Nos. 3.Mesh bender- 3 sizes(Large, Medium, Small) 15 Set 100% – Immediately 12 4.Mesh cutter- minimum 2 Nos. 5.Autoclavable, compatible storage box
Instrument Set, for micro cervical desectomy, Caspar type or similar, with instrument tray, stainless steel.
Instrument Set, for micro lumbar desectomy, with instrument tray, stainless steel.
Micro Neurosurgery instrument set with wire basket
|
