|
Tender description :
|
Tenders are invited for Reconstruction of marmarliyska street ok370 - ok372 - ok341 - ok860v - ok378 - ok598 in the city of veliko tarnovo
"Reconstruction of st. "Marmarliyska" (OK370 - OK372 - OK341 - OK860v - OK378 - OK598) in the city of Veliko Tarnovo". The reconstruction of st. "Marmarliyska" town Veliko Tarnovo will be carried out entirely along the existing route. It covers the street surface from point 3 at km. 0+020 to point 65 to km 0+630.22. A reconstruction of the street and sidewalk pavement is planned. The project envisages technological milling of the asphalt pavement, excavation of the street base, excavation for the laying of new sewers and water pipes, reverse embankments and sealing of trenches for sewers and water pipes, and preparation of the base for the necessary layers for the construction of the street bed. Technological milling of the existing asphalt will be carried out and a dense asphalt mixture will be laid along the street. "Marmarliyska" from st. "Magistralna" to p.t. 3 at km 0+020 and the intersection with st. "Lyuben Karavelov" after p.t. 65 to km 0+630.22 . It is planned to dismantle almost all existing lighting poles /and all unused amortized poles - for light signs, pedestrian traffic lights, etc./ and replacement with new street lighting poles. Basic reconstruction of the existing water mains along the street and their alignment with water supply and fire safety regulations, as well as implementation of new water mains along the streets in accordance with the existing development. The total length of the street water mains planned for major repair under this project is 1167.60m. It is planned to replace the existing sewer pipes with new ones, as during the construction, reconstruction and replacement of the inclusions from the side streets as well as the building sewer diversions are planned. The pavement from p.t. 1 to point 4 left and right, from point 16 to point 23 right and part of the sidewalk from point 33 to item 37 has been replaced over time. In these places, the pavement will be preserved, only tactile plates will be installed to connect the rest of the pavements and form a single pedestrian space. In a partially accessible environment, the following is planned: Cutting with a fugue cutter of vibro-pressed pavers - 218.00 m; Dismantling of vibro-pressed pavers, incl. sorting - 44.00 sq.m.; Delivery and montage of tactile plates forming a 40/40 cm caution (warning) strip. – 60.00 sq.m.; Supply and installation of tactile plates forming a 40/40 cm guiding strip (guide line), - 489.00 sq.m. Other works are planned, according to the technical specification. The full description of the types of works is according to the technical project, an integral part of the technical specification.
|
