|
Requirement :
|
RESTORATION OF MD ACCN TO ARREST IMMEDIATE LEAKAGE AND SEEPAGE WITH ASSOCIATED WKS AT AMBALA CANTT UNDER GE NORTH AMBALA ,2.0 ,B/R Work ,Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. ,Rendering 15mm thick in cement mortar 14 on any faces of brick work or concrete wall surfaces and finished fair & even without using extra cement including necessary scaffolding etc complete all as specified and directed. ,Rendering 15mm thick in cement mortar 16 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement including necessary scaffolding etc complete all as specified and directed. ,Rough cast plaster as specified in SSR Part-I, clause 14.22 consisting of under coat in cement mortar 13 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate which is generally of size between 6 to 12 mm depending on texure required mixed with coarse sand and cement in the ratio 111 shall be applied complete all as specified and directed. ,Rendering 5 mm thick on ceiling surfaces of brick work or concrete wall surfaces in cement mortar 13 and finished even and smooth without using extra cement complete all as specified and directed. ,Preparation of new plaster surface of ceilling and applying three coat of white wash complete all as specified and directed. ,Preparation of new plastered /concrete surface of wall, applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and directed. ,Preparation of new plastere surface of walls and applying two coats of oil bound distemper over and including a coat of 2 mm thick cement base putty and a coat of alkali resistant primer complete all as specified and as directed. ,Complete removal of existing treatment on ceiling (any number of layers) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge ,Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and directed by the Engineer-in-Charge ,Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 154892004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including alkali resistant primer complete all as specified and directed by the Engineer-in-Charge ,Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of oil bound distemper with painting roller over and including a coat of alkali resistant primer and 2mm thick wall care putty white cement based in two coats to achieve smooth surface complete all as specified and directed. ,Preparation of old wooden painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed. ,Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. ,Roughening concrete surface of old concrete floor by picking, sweeping clean and washing down
with water to remove dust etc and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed. ,Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed.. ,25mm thick cement concrete 124 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floors complete all as specified and as directed. ,Non–skid ceramic colour tiles 7 to 8mm thick (square /rectangular) area of each tiles exc 0.11 sqm but n exe 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar (16) , complete all as specified and directed. ,Glazed ceramic colour tiles in vertical surface 300X600X7mm thick in dado, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement mortar 14 , complete all as specified and directed ,Non skid coloured ceramic tiles 7 to 8 mm thick, (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 15mm thick screed bed in cement mortar (16) , complete all as specified and directed ,Non skid coloured ceramic tiles of 7 to 8 mm thick, (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar (14), complete all as specified and directed ,300x300 mm & 10mm thick anti-skid pavement tile Endura vetrified tile in approved color & shade and in anti skid finish, set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 15 mm thick screed bed in cement mortar 14 and including desmantiling existing old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed ,300x300 mm & 10mm thick anti-skid pavement tile Endura vetrified tile in approved color & shade and in anti skid finish, set and jointed in neat cement slurry as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar (14), complete all as specified and directed complete all as specified and directed ,Double charged vitrrfied ceramic tile light shade 10 mm thick (square/rectangular) polished , area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick rendering on fair faces of brick /concrete surfaces in cement mortar (16), complete all as specified and directed ,Double charged vitrrfied ceramic tile light shade 10 mm thick (square/rectangular) polished , area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar (14), complete all as specified and directed ,Granite (of any type) slab 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed in white cement as in floors/ cooking platform, with admixiture of pigment to match the shade of granite stone incl
|
