Tender Detail
| Buyer/Seller : | Can be viewed by Subscribers |
|---|---|
| DID : | 87453214 |
| Requirement : |
DISMAN SHELL PLATE Changing of shell plates. Dismantling of shell plate. * FAB/ERN OF SHELL PLATE Fabrication, erection and matching of shell plates. * DISMAN,ERN RETAINER RING,THROAT,BF Dismantling, erection and welding of retainer ring of throat of furnace.The job involvesa. Fabrication of scaffolding . b. Cutting and dressing of old damaged retaining ring.c. erection of new retaining ring in pieces. d. Matching and alignment .e. full welding of retaining ring. f. rectification if any. g. removal of scrap and scaffolding. * WELDING OF SHELL PLATE IN BF Preparation of joints V cutting, grinding and welding of shell plate. * CHNG OF HBV 2000 TO 3000 MM OF STOVES,BF CHANGING OF HOT BLAST VALVE OF STOVES IN BLAST FURNACE. VALVE DIA FROM 2000-3000MM. * INSTALL COMPENSATOR DIA 2000 MM INSTALL COMPENSATOR DIA 2000 MM * REPLCG OF T JOINT OF DIA325X10MM Fabrication & erection of 10 nos. T joints of Dia.325xDia219mm pipe. * BLANKING/DE-BLANKING COLD BLAST VLV Blanking and deblanking of cold blast valve. * DSMNTLNG OF CLMN & GRATINGS,BF DISMANTLING OF GREY CAST IRON COLUMN & GRATINGS IN STOVES OF BF * ERECTION OF CLMN & GRATINGS,BF ERECTION OF GREY CAST IRON COLUMN & GRATINGS IN STOVES OF BF * OPEN/REFIX MANHOLE COVER-PGC Opening of manhole covers, painting & re-fixing with new packings. * CHNG/RVGN GAS VALVE DIA 1200 MM CHNG/RVGN GAS VALVE DIA 1200 MM * CHNG OF CHIMNEY VLV OF STOVES, BF CHANGING OF CHIMNEY VALVE OF STOVES OF BF * DIS.OF STRUCTURES ABOVE 6-11 M DISMANTLING OF STEEL STRUCTURES ABOVE 6-11 M LEVEL. The job involves the following activities - 1.Preparation of scafoalding for dismantling of steel structures. 2 Dismantling of structures in approach of scafoalding portion 3 Removal of generated scraps from the working area * FAB &ERECTION OF STRUCTURES ABOVE 6-11M FABRICATION AND ERECTION OF STEEL STRUCTURES ABOVE 6-11 M LEVEL. The job involves the following activities - 1. Fabrication of Steel Structures. 2 Preparation of scafoalding @ every 1.8 Mtrs level. 3 Fixing of clits, fixtures etc. For erection of steel structures. 4.Erection of steel structures. 5 Welding of the structures with the old structures ( after alignment/matching/etc.) * DIS. OF STRUCTURES ABOVE 11-23M DISMANTLING OF STEEL STRUCTURES 11-23 M LEVEL. The job involves the following activities - 1.Preparation of scafoalding for dismantling of steel structures. 2 Dismantling of structures in approach of scafoalding portion 3 Removal of generated scraps from the working area * FAB& ERECTION OF STRUCTURE ABOVE 11-23M FABRICATION AND ERECTION OF STEEL STRUCTURES 11-23 M LEVEL. The job involves the following activities - 1. Fabrication of Steel Structures. 2 Preparation of scafoalding @ every 1.8 Mtrs level. 3 Fixing of clits, fixtures etc. For erection of steel structures. 4.Erection of steel structures. 5 Welding of the structures with the old structures ( after alignment/matching/etc.) * PAINTING Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm * SCAFFOLDING/STRUC FAB,EREC,DISMANTLING Temporary scaffolding /structural fabrication, erection & dismantaling as & where required. * ERN/WLDG OF BRICK ELEVATOR PLATFORM Erection & welding of brick elevator platform, mortar lifting platform & other related structures. The job involves a. Placing of ladders whenever necessary to be done b. Temporary scaffoldings to be made as & when required c. Fabrication of structure as per requirement.d. Slinging of structure properly after fixing all clits etc.e. Shifting & lifting of assembly near approachesf. Provisions for lifting by winches, CPBlock etc. to be done g. Lifting of structure to required heights h. * FAB OF TRUSS/STR FOR BRICK ELEVATOR Fabrication, erection & welding of truss, strengthening structures.The job involves a. Placing of ladders whenever necessary to be done b.Temporary scaffoldings to be made as & when required c. Fabrication of structure as per requirement.d. Slinging of structure properly after fixing all clits etc.e. Shifting & lifting of assembly near approachesf. Provisions for lifting by winches, CPBlock etc. to be done g. Lifting of structure to required heights h. Placing & positioning of structu * SHIFTING/ASSY OF BRICK ELEVATOR/WINCH,BF Shifting, erection assembly & trial run of brick elevator, mortar lifting winches. The job involves a. Cleaning of area for preparation of stand to assemble links b. Assembly of links c. Match marking to be done d. Dissemble of links e. Shifting of assembly near approaches f. Arrangement shall be made for lifting g. Removal of bed/stands h. Slinging of structure properly. Lifting of structure to required heights. i. Placing & positioning of structure at its place j. Matching & alignme * UPKEEP OF BRICK ELEVATOR,MORTAR WINCH,BF UPKEEPING OF BRICK ELEVATORS AND MORTAR LIFTING WINCHES DURING REPAIR. THE JOB INVOLVES CLEANING, GREASING, TIGHTENING OF WINCHES ,BRICK ELEVATORS,ETC.CHANGING OF BEND LINKS OF ELEVATORS,ROPE OF WINCH MACHINES, REVISIONING OF GEAR BOX,PROVIDING TENSION AS PER REQUIREMENT& STRUCTURAL REPAIR IF REQUIRED. * SHIFTING &INSTALLATION OF WINCHES M/C. SHIFTING &INSTALLATION OF WINCHES M/C. |
| Tender description : | DISMAN SHELL PLATE Changing of shell plates. Dismantling of shell plate. *# FAB/ERN OF SHELL PLATE Fabrication, erection and matching of shell plates. *# DISMAN,ERN RETAINER RING,THROAT,BF Dismantling, erection and welding of retainer ring of throat of furnace.The job involves:a. Fabrication of scaffolding . b. Cutting and dressing of old damaged retaining ring.c. erection of new retaining ring in pieces. d. Matching and alignment .e. full welding of retaining ring. f. rectification if any. g. removal of scrap and scaffolding. *# WELDING OF SHELL PLATE IN BF Preparation of joints #V# cutting, grinding and welding of shell plate. *# CHNG OF HBV 2000 TO 3000 MM OF STOVES,BF CHANGING OF HOT BLAST VALVE OF STOVES IN BLAST FURNACE. VALVE DIA FROM 2000-3000MM. *# INSTALL COMPENSATOR DIA 2000 MM INSTALL COMPENSATOR DIA 2000 MM *# REPLCG OF T JOINT OF DIA325X10MM Fabrication & erection of 10 nos. #T# joints of Dia.325xDia219mm pipe. *# BLANKING/DE-BLANKING COLD BLAST VLV Blanking and deblanking of cold blast valve. *# DSMNTLNG OF CLMN & GRATINGS,BF DISMANTLING OF GREY CAST IRON COLUMN & GRATINGS IN STOVES OF BF *# ERECTION OF CLMN & GRATINGS,BF ERECTION OF GREY CAST IRON COLUMN & GRATINGS IN STOVES OF BF *# OPEN/REFIX MANHOLE COVER-PGC Opening of manhole covers, painting & re-fixing with new packings. *# CHNG/RVGN GAS VALVE DIA 1200 MM CHNG/RVGN GAS VALVE DIA 1200 MM *# CHNG OF CHIMNEY VLV OF STOVES, BF CHANGING OF CHIMNEY VALVE OF STOVES OF BF *# DIS.OF STRUCTURES ABOVE 6-11 M DISMANTLING OF STEEL STRUCTURES ABOVE 6-11 M LEVEL. The job involves the following activities :- 1.Preparation of scafoalding for dismantling of steel structures. 2 Dismantling of structures in approach of scafoalding portion 3 Removal of generated scraps from the working area *# FAB &ERECTION OF STRUCTURES ABOVE 6-11M FABRICATION AND ERECTION OF STEEL STRUCTURES ABOVE 6-11 M LEVEL. The job involves the following activities :- 1. Fabrication of Steel Structures. 2 Preparation of scafoalding @ every 1.8 Mtrs level. 3 Fixing of clits, fixtures etc. For erection of steel structures. 4.Erection of steel structures. 5 Welding of the structures with the old structures ( after alignment/matching/etc.) *# DIS. OF STRUCTURES ABOVE 11-23M DISMANTLING OF STEEL STRUCTURES 11-23 M LEVEL. The job involves the following activities :- 1.Preparation of scafoalding for dismantling of steel structures. 2 Dismantling of structures in approach of scafoalding portion 3 Removal of generated scraps from the working area *# FAB& ERECTION OF STRUCTURE ABOVE 11-23M FABRICATION AND ERECTION OF STEEL STRUCTURES 11-23 M LEVEL. The job involves the following activities :- 1. Fabrication of Steel Structures. 2 Preparation of scafoalding @ every 1.8 Mtrs level. 3 Fixing of clits, fixtures etc. For erection of steel structures. 4.Erection of steel structures. 5 Welding of the structures with the old structures ( after alignment/matching/etc.) *# PAINTING Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm *# SCAFFOLDING/STRUC FAB,EREC,DISMANTLING Temporary scaffolding /structural fabrication, erection & dismantaling as & where required. *# ERN/WLDG OF BRICK ELEVATOR PLATFORM Erection & welding of brick elevator platform, mortar lifting platform & other related structures. The job involves a. Placing of ladders whenever necessary to be done b. Temporary scaffoldings to be made as & when required c. Fabrication of structure as per requirement.d. Slinging of structure properly after fixing all clits etc.e. Shifting & lifting of assembly near approachesf. Provisions for lifting by winches, CPBlock etc. to be done g. Lifting of structure to required heights h. *# FAB OF TRUSS/STR FOR BRICK ELEVATOR Fabrication, erection & welding of truss, strengthening structures.The job involves: a. Placing of ladders whenever necessary to be done b.Temporary scaffoldings to be made as & when required c. Fabrication of structure as per requirement.d. Slinging of structure properly after fixing all clits etc.e. Shifting & lifting of assembly near approachesf. Provisions for lifting by winches, CPBlock etc. to be done g. Lifting of structure to required heights h. Placing & positioning of structu *# SHIFTING/ASSY OF BRICK ELEVATOR/WINCH,BF Shifting, erection assembly & trial run of brick elevator, mortar lifting winches. The job involves: a. Cleaning of area for preparation of stand to assemble links b. Assembly of links c. Match marking to be done d. Dissemble of links e. Shifting of assembly near approaches f. Arrangement shall be made for lifting g. Removal of bed/stands h. Slinging of structure properly. Lifting of structure to required heights. i. Placing & positioning of structure at its place j. Matching & alignme *# UPKEEP OF BRICK ELEVATOR,MORTAR WINCH,BF UPKEEPING OF BRICK ELEVATORS AND MORTAR LIFTING WINCHES DURING REPAIR. THE JOB INVOLVES CLEANING, GREASING, TIGHTENING OF WINCHES ,BRICK ELEVATORS,ETC.CHANGING OF BEND LINKS OF ELEVATORS,ROPE OF WINCH MACHINES, REVISIONING OF GEAR BOX,PROVIDING TENSION AS PER REQUIREMENT& STRUCTURAL REPAIR IF REQUIRED. *# SHIFTING &INSTALLATION OF WINCHES M/C. SHIFTING &INSTALLATION OF WINCHES M/C. |
| Company Industry: | Stainless Steel |
Key values
| Tender Estimated cost : | INR 3,255,991 |
|---|---|
| Closing date : | 22/09/2025 |
| Location : | India-Jharkhand |
Tender Documents
| NIT : | Can be viewed by Subscribers |
|---|---|
| Documents : | Can be downloaded by subscribed users :- Document 1 |