|
Requirement :
|
Supply of LT Brass Studs 3/4" , HT Brass Studs 1/2" (IS3347), LT Brass Studs 1/2" (IS3347), Kraft Paper 2.5 Mil, Kraft Paper 4.0 Mil, Press Board 1mm, Press Board 2mm, Press Board 3mm, Bakelite Tube 3/8X1/2", Bakelite Tube 5/8X3/4", Al. Neutral clamp with complete set, LT Bushing 250 amp, LT Bushing 630 amp, HT Bushing (IS 1180), HT Bushing 250 amp, HT Bushing (IS3347), HT Bushing Clamp 4 hole, HT Bushing Clamp 6 hole, GI. Cap ½'', GI. Cap 1'', GI. Cap 1.5'', Cotton Waste, Weaving Cotton Tape 1", Weaving Cotton Tape 1 1/4", Empire Sleeving 2 mm, Empire Sleeving 3 mm, Empire Sleeving 4 mm, Empire Sleeving 6 mm, In-line connector size 6 sqmm, In-line connector size 10 sqmm, In-line connector size 16 sqmm, Crape Paper, Rubberized Cork Strip 40x5mm, Rubberized Cork Strip 50x5mm, Rubberized Cork Washer (109x78x5 mm), Rubberized Cork Washer (50x28x5 mm), Rubberized Cork Washer (45x25x5 mm), Rubberized Cork Washer (32x14x3 mm), Rubberized Cork Washer (70x45x5 mm), Rubberized Cork Tap 65x63x5, Rubberized Cork Washer (63x35x5 mm), Rubber Washer (89x75x5 mm) for EF 75 job, Nylon washer size 38x18x20mm, Nylon washer size 30x18x12mm, Nylon washer size 22x11x12mm, Fevicol, DA Grey Paint, M.Seal, Silicagel Breather 200 kva, Silicagel Breather 100 kva, Silicagel Breather 63 kva, Silicagel Breather 25 kva, M.S. Nuts & Bolts 2 1/2"x3/8" , M.S. Nuts & Bolts 1½“ X 3/8'', M.S. Nuts & Bolts 1½“ X ½'' , M.S. Nuts & Bolts 2½“ X ½'' , M.S. Nuts & Bolts 2½“ X 5/8'', MS washer ½'' , MS washer3/8', MS washer (difft size), Ms Plug 1/2", Ms Plug 1/4", Ms Plug 1", Markin cloth, Press Phan paper 10 Mil, Thinner, BTC Copper Strip, R.C. Sheet 3'x2'x6'mm, Al. Clamping Member.
|
