|
Requirement :
|
Tender Invited For TAPS, BIP TAPS ETC 20MM DIA AND UNDER , INDIA RUBBER WASHERS FOR PILLAR TAPS, BIP TAPS ETC EXC 20MM DIA BUT NOT EXC 32MM , 0.50 INCH FLOAT VALVE , 0.75 INCH FLOAT VALVE , 1 INCH FLOAT VALVE , 0.50 INCH GATE VALVE, STOP VALVES, CASTCOPPER ALLOY, SCREWED DOWN,HIGH PRESSURE,WITH CRUTCH OR BUTTERFLY HANDLE, SCREWED BOTH ENDS FOR IRON PIPE OR FOR UNIONS AND FIXED , 0.75 INCH GATE VALVE , 1 INCH GATE VALVE , STAINLESS STEEL WIRE CLOTH 0.36MM NORMAL DIA OF WIRE AND AVERAGE WIDTH OF APERTURE 1.40MM AND FIXED WITH STAINLESS STEEL WIRE STAPLES, WIDTH 4ft , SECOND CLASS HARD FILLETES not exc. 3 sq cm , 2 INCH ISI, MS HINGES HEAVY WEIGHT, BUTT HINGES, HEAVY WEIGHT, COLD ROLLED MILD STEEL, AND FIXED , 3 INCH I.S.I, MS HINGES HEAVY WEIGHT BUTT HINGES HEAVY WEIGHT, COLD ROLLED MILD STEEL, AND FIXED , 4 INCH I.S.I, MS HINGES HEAVY WEIGHT BUTT HINGES, HEAVY WEIGHT, COLD ROLLED MILD STEEL, AND FIXED , 5 INCH I.S.I, MS HINGES HEAVY WEIGHT BUTT HINGES, HEAVY WEIGHT, COLD ROLLED MILD STEEL, AND FIXED , ALUMINIUM HANDLES 4 INCH Aluminium handles, cast type, anodised , ALUMINIUM HANDLES 5 INCH , ALUMINIUM HANDLES 6 INCH , ALUMINIUM TOWER BOLT 4 INCH, Aluminium anodised, barrel tower bolts of extruded section and fixed , ALUMINIUM TOWER BOLT 6 INCH , ALUMINIUM TOWER BOLT 8 INCH , ALUMINIUM TOWER BOLT 10 INCH , ALUMINIUM TOWER BOLT 12 INCH , ALUMINIUM SLIDING BOLT 8 INCH, Aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, or cast aluminium alloy and fixed , ALUMINIUM SLIDING BOLT 10 INCH , ALUMINIUM SLIDING BOLT 12 INCH , STAINLESS STEEL SINK WITH DRAINING BOARD, MADE OUT OF 1.00MM THICK SHEET FOR KITCHEN WITH PLUG, WASHERS WASTE PIPE, CAST IRON CANTILEVER BRACKETS, CONNECTING UNION OVERALL SIZE 600MMX450MMX60MM , LOOKING MIRROR FANCY TYPE FRAMELESS 18X24 INCH , HDPE WATER TANK COVERS , WASTE PIPE 32MM DIA LOW DENSITY WIRING PRESURE RAFING 4 KG SQM WITH POLYTHENE UNION AND CHECK NETTS 75CM LONG , LP STOP COCK, CONCEAL FANCY TYPE , CURTAIN ROD FANCY, DECORATIVE TYPE WITH BRACKETS AND KNOBS 2 NOS , FLUSH SISTERN BALL COCK , FLUSH TANK LIVER, FLUSH HANDLE , SIPHON WASHER , COMOD BEND PIPE WASHER , 1.25 INCH WASH BASIN WASTE PIPE PVC , 1.25 INCH SINK WASTE PIPE PVC , URINAL WASTE PIPE , SPENDAL FOR TAP, NO OF SPENDAL 1, 2, 2, 4 , SPENDAL WASHER FOR TAP , 1 INCH UPVC TANK NIPLE , 1 INCH UPVC PLUG 15 MM , UPVC SOLVENT , M SEAL , TEPLON TAPE , WHITE CEMENT , MIRROR SCREW AND PLUG , CONNECTION PIPE WASHER , BUTTOM WASHER , EWC SHEET COVER CLAMP , 0.50 INCH X 0.50 INCH UPVC BRASS ELBOW , GI NIPPLE HALF INCH LENGTH 50MM ISI MARKED , PLUMBING TAPE, TEFLON TAPE, HALF INCH , PLUMBING TAPE TEFLON TAPE 0.75 INCH , GI NIPPLE HLAF INCH LENGTH 75MM ISI MARKED , GI NIPPLE HALF INCH LENGTH 100MM ISI MARKED , GI NIPPLE 1 INCH LENGTH 50 MM ISI MARKED , GI NIPPLE 1 INCH LENGTH 75 MM ISI MARKED , GI NIPPLE 1 INCH LENGTH 100 MM ISI MARKED , GI NIPPLE 0.75 INCH LENGTH 50MM ISI MARKED , GI NIPPLE 0.75 INCH LENGTH 75MM ISI MARKED , GI NIPPLE 0.75 INCH LENGTH 100MM ISI MARKED , GI ELBOW HLAF INCH I.S.I MARK WITH HEAVY GRADE , GI ELBOW 0.75 INCH I.S.I MARK WITH HEAVY GRADE , GI ELBOW 1 INCH I.S.I 2
Quantity 10036
|
